Home › Garden Fertilizer Calculator
Garden Fertilizer Calculator: Pounds of Product for a Bed
Enter the bed size, a target nitrogen rate, and the N-P-K (definition) numbers on the bag. You'll get pounds of product, an approximate cup measure, the amount per bed, and how much phosphate and potash that application also supplies.
How the garden fertilizer calculator works
Fertilizer bags are labeled with three numbers, the N-P-K (definition) analysis: percent nitrogen, percent phosphate (P2O5), and percent potash (K2O) by weight. A 10-10-10 bag is 10 percent nitrogen, so each pound of product contains 0.10 pound of nitrogen. To hit a nitrogen rate, divide the pounds of nitrogen you need by that fraction.
Garden recommendations are usually written as pounds of actual nitrogen per 100 square feet. A common range, used in extension fertilizer tables, is about 0.1 to 0.2 pounds of nitrogen per 100 square feet. This calculator defaults to 0.15, the midpoint of that range and the nitrogen rate in University of Minnesota's lawn-and-garden soil-test example. If you have a soil-test number, choose Custom and enter it. A soil test is better than any default, and it will also tell you whether you need the phosphate and potash that a complete fertilizer supplies.
Cups are shown only as a convenience for small beds. Oregon State Extension converts pounds of fertilizer to cups by multiplying by 2, and Clemson Extension notes that for most fertilizers a pint (2 cups) roughly equals a pound. Density varies, so treat cups as an approximation and weigh the product when you can.
Formulas: pounds of nitrogen needed = (lb N per 100 sq ft) × (area in sq ft ÷ 100); pounds of product = pounds of nitrogen needed ÷ (N percent ÷ 100); approximate cups = pounds of product × 2. Phosphate and potash applied = pounds of product × the middle or last number ÷ 100.
Worked example: 100 square feet of 10-10-10 at 0.15 lb N
A 10 by 10 foot bed, or any other shape that adds up to 100 square feet, getting 0.15 pounds of nitrogen per 100 square feet from 10-10-10 needs 0.15 ÷ 0.10 = 1.5 pounds of product, about 3 cups if you measure by volume. That application also supplies 0.15 pounds each of phosphate and potash. A 4 by 8 foot bed (32 square feet) at 0.2 pounds of nitrogen per 100 square feet needs 0.064 pounds of nitrogen, or 0.64 pounds of 10-10-10 (about 1¼ cups). Two of those beds would need 1.28 pounds. University of Minnesota's example of 0.15 pounds of nitrogen per 100 square feet on a 500-square-foot garden, using a 15-20-30 fertilizer, is 5 pounds of product (1 pound per 100 square feet).
Iowa State Extension works the same math: 0.15 pounds of nitrogen per 100 square feet from a 10-2-6 fertilizer is 1.5 pounds of product per 100 square feet, or 0.9 pounds on a 60-square-foot bed.
Using the result in the garden
- Broadcast the fertilizer evenly and work it into the top few inches before planting, unless the product label says otherwise.
- Keep granules off leaves and 4 to 6 inches away from stems; water it in.
- If a soil test already shows high phosphorus or potassium, choose a fertilizer with a low or zero middle or last number so you are not adding nutrients you do not need.
- This tool is for garden beds, not lawns, and it does not replace the bag's label or a soil-test report.
Frequently asked questions
How much fertilizer do I need for a garden bed?
Multiply your nitrogen rate by the area, then divide by the nitrogen fraction on the bag. At 0.15 pounds of nitrogen per 100 square feet, a 100-square-foot bed needs 1.5 pounds of 10-10-10, or 0.75 pounds of 20-10-10. A 4 by 8 foot bed (32 square feet) at the same rate needs 0.48 pounds of 10-10-10.
What nitrogen rate should I use if I don't have a soil test?
A common garden range is 0.1 to 0.2 pounds of actual nitrogen per 100 square feet. This calculator defaults to 0.15, which is the midpoint of that range and the nitrogen rate in University of Minnesota Extension's lawn-and-garden soil-test example. A soil test is better than any default, and it will also tell you whether you need phosphate and potash.
How do I convert pounds of fertilizer to cups?
Oregon State Extension says to multiply pounds by 2 to get cups, and Clemson Extension notes that for most fertilizers a pint roughly equals a pound (a pint is 2 cups). That is only an approximation, because prills vary in density. Weigh the product when you can, especially for rates under a pound.
Does this also tell me phosphorus and potassium?
The amount is based on nitrogen, which is the usual way to size a complete fertilizer when you are matching an N rate. The result also shows how much phosphate and potash that amount of product will supply, from the second and third numbers on the label. If a soil test says you already have enough P or K, choose a fertilizer with a low or zero middle or last number.
Is this for lawns or garden beds?
Garden beds. Lawn rates are often written per 1,000 square feet and are a different job. Use a soil test, and never apply more nitrogen than the crop and the test support. Water granular fertilizer off the leaves after you spread it.
Sources
- University of Minnesota Soil Testing Laboratory, Recommendations (Lawn & Garden) (example rate of 0.15 lb nitrogen per 100 sq ft; pounds of product = recommended N divided by the bag's nitrogen fraction). soiltest.cfans.umn.edu
- Clemson Cooperative Extension, Recommendations for Liming and Fertilizing Vegetables, HGIC 1254 (preplant rates for garden vegetables; for most fertilizers, a pint roughly equals a pound). hgic.clemson.edu
- Oregon State University Extension, Fertilizing your garden: Vegetables, fruits and ornamentals, EC 1503 (rates per 100 square feet; scale up by area; convert pounds to cups by multiplying by 2). extension.oregonstate.edu
- NC State Extension, Extension Gardener Handbook, Chapter 1, Soils and Plant Nutrients, and Chapter 16, Vegetable Gardening (read the fertilizer label; use a soil test to guide nitrogen, phosphorus, and potassium in the vegetable garden). content.ces.ncsu.edu
- Iowa State University Extension, How to Calculate Fertilizer Rates for the Garden (0.1, 0.15, and 0.2 lb N per 100 sq ft tables; pounds of product = N rate divided by the nitrogen fraction). yardandgarden.extension.iastate.edu
Last reviewed 2026-11-17.
Related calculators
- Raised Bed Soil Calculator — Figure soil to fill the bed before you fertilize it.
- Mulch & Compost Calculator — Compost is another way to add organic matter to the same beds.
- How Many Plants per Person — Plan what you will grow in the garden you are fertilizing.